How do you replace the roller on the STEAMRS Luxe Lint Roller? (Step-by-Step Guide)

Has the roll in your STEAMRS Luxe Lint Roller run out? Don't worry - replacing the roll is quick, easy, and something you can do yourself. Follow these clear steps to refill your lint roller with a new adhesive roll.

Spare adhesive rolls for this lint roller are always available to order separately. This means you can reuse your lint roller countless times and keep your clothes looking fresh and free of lint and hair.

Step 1: Open the closure flap

Open the closure flap located halfway along the lint roller. This gives you access to the inside, where the adhesive roll is located.

Step 2: Push the black side button outward

Use your thumb to gently push one of the black round buttons on the side of the roller outward. Meanwhile, hold the tube firmly with your other hand.

Step 3: Remove the adhesive roll from the tube

Lift the tube while holding the button down. This makes it easy to remove the old roll from the lint roller holder.

Step 4: Remove the old roll from the tube

Press the black button on the other side outward again with your thumb and remove the old roll from the tube.

Step 5: Remove the caps from the old roll

There are black caps on both ends of the adhesive roll. Carefully remove them and keep them: you'll need them for the new roll.

Step 6: Place the caps on the new refill

Take a new lint roller refill (adhesive roll) and press the caps firmly onto both ends.

Step 7: Place the new roll back in the tube

Slide the left side of the new roll into the hole in the tube first, then click the right side into place.

Step 8: Place the tube back in the lint roller holder

Use the same method as when removing it: press the black button and click the tube with the new roll back into the holder.

Ready to use

And there you go! Your STEAMRS lint roller is ready to effortlessly remove dust, hair, and lint from your clothes again. Replacing the roll on time keeps it working at its best.